Zophar's Message Domain

Zophar's Message Domain (http://www.zophar.net/forums/index.php)
-   Talk of the Town (http://www.zophar.net/forums/forumdisplay.php?f=6)
-   -   DVD-Writer issue (http://www.zophar.net/forums/showthread.php?t=10185)

schmocke 01-06-2009 07:37 PM

DVD-Writer issue
 
Hi folks.
Iīve obtained a new DVD-Writer for my PC (Model: LG GH22NP20), hoping to gain faster writingspeeds up to 22x for DVD-/+ R media. My former writer was limited to 4x.
Yet I tried 12x, but it takes nearly the same time than 4x, appr. 14 minutes. The RAM-buffer decreases very fast when writing on 12x so the drive slows down the writing speed untill the buffer is filled again, and so on..
Even on 8x the speed is averaged at 5,6x.
Perhaps itīs my PC, which isnīt the newest model (MB: Abit IC-7, Pentium 4 with Hyperthreading @2,8 Ghz, 1GB RAM, 160GB S-ATA HD)!?
The LG-writer is mastered and hooked up on IDE-2 solely.
Any suggestions!?

Thanks in advance.
Regards, schmocke

Reaper man 01-06-2009 09:34 PM

are you using an 80 pin ribbon connection?

schmocke 01-06-2009 11:24 PM

I guess, it looks like this one:

http://www.ditcorp.com/mmDIT/Images/cblgenatar324_a.jpg

Itīs the same cable I used with the old device.
So you think itīs eventually the connection, not my systems specs!?

regards, schmocke

Reaper man 01-07-2009 03:26 AM

if it's a 40 conductor ribbon cable, then it might be an issue.

in that image, I honestly can't tell, but I would bet my money that it's 80 conductor. If you want, count how many "wires" are on the connector end. If you get past 40, you're good.

if it's 80, then the next step would be to see what DMA mode the device is running at. One way to do it is to find a CDROM benchmarking program. Send the results here and we can look at it.

schmocke 01-07-2009 01:18 PM

The Windows Hardware Manager says, that the device on secondary IDE channel runs at "Ultra-DMA-Mode 4"

Reaper man 01-07-2009 04:27 PM

Quote:

Originally Posted by schmocke (Post 85616)
The Windows Hardware Manager says, that the device on secondary IDE channel runs at "Ultra-DMA-Mode 4"

What CD Burner are you using?

schmocke 01-07-2009 05:12 PM

DVD-Burner, look at my first post - itīs the LG GH22NP20...
If I remember right, Ultra-DMA-4 supplies a data-transfer rate of around 66 MB/s. That should be enough for up to 22x DVD writing.
Still confused..

Reaper man 01-07-2009 07:00 PM

the software could just be a buggy piece of shit. Have you tried Nero?

schmocke 01-08-2009 01:04 PM

I doubt that. Iīve tried several software yet (CD Burner XP, NERO, Alcohol 120) and itīs all the same. 4x writing works great as always, 8x is slightly faster and everything above 8x sucks. Anyone else ideas!?
regards, schmocke

The 9th Sage 01-08-2009 03:41 PM

It's a longshot, but some drives have the ability to upgrade their firmware (I know the drive on my laptop can do this)...perhaps the firmware on it is terrible/buggy? Don't know if you can upgrade that drive or not, but probably worth looking in to.


All times are GMT. The time now is 07:49 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.